Recent content by 411 guy

steering box,swing axle chassis/gearbox, and 1600 AD 50bhp engine not seized,complete with tinware.

Has anyone got a standard beetle plastic dash with the radio slot cutout to sell? , or i'll swap for mine which hasn't the slot/hole cutout yet.

sorry for the bad pics, but your welcome to look anytime.

3 point seats used one triangular shaped mounting on the floorpan,which supports the middle of the front of the seatbase. this type of seat used a lever mounted on the chassis centre tunnell to adjust the seat forwards and backwards. the earlier 2 runner seats were adjusted forwards and...

sorry if I've wasted your time but I just realised they're a bad set as they seem to be different widths, 2 measure 90mm and 1 measures 85mm and the other 80mm across where the tyre touches the rim, 3 have the welded centre ,the other is riveted. and 1 never had the clips for a hubcap, and the...

this was on an industrial engine I have, it had an oil temperature cut-out switch and the pipe was a return line for the oil to one of the generator pedestal bolts. sorry I cant sell it but it may help you get ideas.

The 3 pieces in my pic are like yours, but yours is missing the raised piece that surrounds the round pre-heater pipe that goes up towards the manifold. you could remove it(the raised piece) from any of mine and they would be the same shape(underneath, the raised piece) as yours. has your engine...

theyre not the same as in your picture but there if you need one

are you sure the bulb doesn't pull out of the holder,some of mine were quite stubborn comming out. i have some of these if theyre any use.?

pre '65 rear window seal (takes trim), 45euro '60s door handles great chrome, 40euro '60s taillight lenses (american) 30euro '60s tailight lenses (european) 35euro '60s front turn signal rubber bases 10euro 6V ghia wiper motor, 20 euro '70 tailight base, 15euro '60s ghia heater levers? 5 euro...

not a great pic but you should see something similar?

i have these, can have tested if you like.?

i need a bonnet for a '56 oval bug, if anyone can help,thanks.i have a '60s one that dosent fit to sell/swap.

sorry dont have the later type with rubber flexi. these are the earlier ones.45 euro each?

would members be interested in the traders posting a few pages of what parts they brought to galway in this thread ? from talking with some of the others on the day there wasnt as much sold as was expected. we know bug/bus drivers out there need/want the parts ? or do they ? humphry from fermoy...