Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

whats she worth

D

dillontobin

Guest
September 17, 2009
751
0
cork
got offered a 77 bay window
half restored 4 new cab doors
1.6 engine
good interior
new repair panels

how much do ye think i should pay for it
 
no just a camper he has 2 sets of new doors for it
and new repair panels
he done the chassis it and put new back panels in it and a decklid
im buying it but how much should i pay
 
Its worth whatever you are happy to pay for it!

Without detailed photos you will only receive the type of responses as above. A written description like you provided doesn't tell alot.
 
well if the van is half restored then it will only be liable for rust tax at 36% on half of the value of the van, i.e. €1763.82 soooo...

€3527.64 (precise value of van)
+ € 634.97 (36% of €1763.82)
€4162.61 (adjusted value of van)
 
trev said:
well if the van is half restored then it will only be liable for rust tax at 36% on half of the value of the van, i.e. €1763.82 soooo...

€3527.64 (precise value of van)
+ € 634.97 (36% of €1763.82)
€4162.61 (adjusted value of van)
Click to expand...


Its possible to offset the rate of Rust tax payable, by converting the existing rust
into a non taxable material by using a suitable rust Converter.

Tim

http://www.theruststore.com/Rust-Converter-Gallon-P40C10.aspx
http://www.theruststore.com/Rust-Converter-Gallon-P40C10.aspx

Labor saving process converts rust into a protective layer that can then be painted over
Rust Converter can be applied to just about any rusted iron or steel surface. It converts rust into a protective black layer that seals out moisture and protects against future corrosion.
Applications for Rust Converter include: vehicles, trailers, fences, iron railings, sheet metal, outside of tanks, lawn equipment, and more.
Rust converter is applied like a primer to rusted surfaces. Instead of the longer process of removing the rust on larger surfaces, rust converter is applied over existing rust after simply removing the loose rust. This labor-saving process greatly reduces the time involved on many projects. Applying the rust converter is done with either a brush or a roller. A second coat of Rust Converter will provide a greater level of protection. An optional top coat of oil-based paint is all that is needed to provide outdoor protection to your new surface.
Click to expand...
 
You must log in or register to reply here.
Top Bottom
Back