Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

[For Sale: Parts] weber carbs and stuff for sale

caddy

Club Member
Club Member
September 22, 2009
724
5
Armagh
bugbitz.com
a used weber progressive 32/36 DFAV with manifold and filter .
came of a running 1600 van that was converted to a bigger twin carb engine.
£100

Picture 290.jpg

a used pair of dellorto drla40's came of an alfa 33.
£200

Picture 291.jpg

a used pair of weber ICH's the same as ICT's
need rebuilt kits £70

Picture 292.jpg

a used crane xr3000 ignition system for type 1 engine.

with german 009 distributor £200
without 009 distributor £100

Picture 293.jpg

a new old stock set of mahle 90.5mm barrels and pistons £250

a new old stock set of mahle 88mm barrels and pistons (machine in) £150

1.9tdi engine ahu code complete with turbo £300 .

1.9tdi engine afn code turbo not good £200.

DC code type3 irs gearbox £300 will fit bug or splitty
AM code type 1 irs gearbox £200
CE code type 2 gearbox £150
DH code type 25 gearbox £100

used sets of barrels and piston 85.5 mm 1600cc £30 set
 
Last edited:

caddy

Club Member
Club Member
September 22, 2009
724
5
Armagh
bugbitz.com
will that 88mm NOS piston set suit a 1200 rebuild?, what do you mean "machine in".?

88mm pistons use the larger 22mm size gudgeon pins found in 1300-1600 rods , the 1200 uses 20mm pins.
machine in means the case is machined to fit barrels , there are 88mm slip in barrels available but they are very thin and are prone to cracking.