Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

wanted: MIG welder

don't suppose you have a link or even a username? Can't find it on the search...
 
Last edited:
airhead said:
I'll swap you an arc welder if you replace the heater channel on my beetle!

Deal of the century! Do it!
Click to expand...

Wouldn't be as simple as just replacing a heater channel Ross.
More panels are needed when doing the heater channels. Unless your lucky.
 
try laois hire i got a good deal on two welders in the last two years at the best prices i could find im looking around for an acdc welder if anyone here knows suppliers let me no
 
donegaldave said:
Trev just got the clarke mig151en turbo delivered last week. have tried it on scrap .8mm and used it to make a sheet metal folder over the weekend from 60mm and very impressed with it - the price was good too. dunno about delivery here from the uk but i have an address in the black north if needed.
www.clarketools-uk.com
Click to expand...

if this interested ya trev, you could send to mine?
 
I have a welder coming to me after the weekend from a friend on T2i, if that turns out to be duff then I have a second offer of one pretty close to me. However, both are 130amp. If I can turn up something a bit bigger/better I'm still in the market. Thanks for the offers guys but I'm not going to buy one from the UK, it's just a lot of hassle with delivery/collection etc. I might yet investigate that company George bought from...
 
trev i did a bit of test welding last night with it and so far i'm happy, seems like a nice machine but i'll let you know when i really put it to the test. it has all the nice spot welding features and digital display for wire speed and welding time etc etc
 
Gasweld in Dublin have good machines .Murex, Esab etc

Pricey but you can still get spares for Murex machines that were made 20 years ago.

I got a Tradesmig 40-250A - will weld plate with care or you could use 0.6mm wire but will burn easily up to 10-12mm - handy for when you are building your LexiDerbyBugTank which I am sure you have plans for !
 
donegaldave said:
Trev just got the clarke mig151en turbo delivered last week. have tried it on scrap .8mm and used it to make a sheet metal folder over the weekend from 60mm and very impressed with it - the price was good too. dunno about delivery here from the uk but i have an address in the black north if needed.
www.clarketools-uk.com
Click to expand...

Any pics of the folder?
 
You must log in or register to reply here.
Top Bottom
Back