Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

Selection of Porsche Alloys

kvinyl

Club Member
Club Member
February 20, 2007
4,708
9
Galway
Have the following for sale. All of these wheels have a PCD of 5 x 130mm.

1) Set of 5.5" x 14" Fuchs, ET 46mm, part number 911.361.016.10.
Wheels are straight and true, need to be refinished.
No tyres, no center caps.

P6171351.jpg




2) Set of 6" x 15" Fuchs, ET 36mm, part number 901.361.012.06.
These are a set of the rarer early type, deep dish version.
Wheels are straight and true, I think the finish is the original anodising.
Firestone tyres with lots of thread left, no center caps.

K_Ghia_5.jpg


K_Ghia_13-1.jpg




3) SOLD - Set of 7" x 15" Teledials, ET 36mm, part number 928.361.016.00.
Wheels are straight and true. No tyres, comes with center caps.

TDialRear2.jpg




4) One 6" x 16" Fuch, ET 36mm, part number 911.361.020.43.
Wheel is straight and true, I think the finish is the original anodising.
No tyre, comes with center cap.



5) One 7" x 16" Fuch, ET 23mm, part number 911.361.020.44.
Wheel is straight and true, I think the finish is the original anodising.
No tyre, comes with center cap.



6) Set of 6" & 8" x 16" Polished Design 90s, ET 52mm, part numbers 964.362.112.01/964.362.116.01
Wheels are straight and true and are polished.
No tyres, no center caps.

P4191062.jpg


1205.jpg




7) SOLD - Two sets of 7.5" x 17" Cup 1s, ET 23/52mm, Mille Miglia replicas
Wheels are straight and true, with minimum curb rash.
One set is shod with 215/45 Falken tyres, the other with 205/40, 215/45 Avons. Both sets come with center caps. SALE PENDING on one set.

P6171363.jpg


ovalracing.jpg




8) Set of 8.5" & 10" x 18" Cup 3s, ET 52/47mm, Mille Miglia replicas
Wheels are straight and true, with a bit of curb rash.
No tyres. Have a set of RH center caps that would fit these.

P6051305.jpg


T25-Cup3.jpg




9) Set of 8.5" & 10" x 18" Highlines, ET 52/58mm, 3-piece style
These wheels are brand new and have never been fitted. Excellent condition.
No tyres. Comes with center caps.

P6171344.jpg


P1080847.jpg



10) Set of 8.5" & 10.5" x 18" Techarts, ET 52/58mm. Produced by BBS for Techart.
These wheels are in great condition. No tyres. Comes with center caps.

P6171360.jpg


19468589_G.jpg




11) Pair of Toyo Proxes 205/60 R15 tyres. Loads of thread left.



12) Pair of Goodyear Eagles 185/55 R15 tyres. Have been mounted but never seen road. Tyres still have first day knobbly bits on them.

Drop me a PM if you need any more details.
 
Last edited:

kvinyl

Club Member
Club Member
February 20, 2007
4,708
9
Galway
heya,
Would it be possible to fit those highlines to a split

They won't be a straight bolt on fit but anything is possible with a bit of effort...

The biggest concern I'd have is physically fitting them under the arches - the rears are 10" wide...


This shows a set of 18" Porsche wheels fitted to a Ghia...and a 993 3.6 engine, 6-speed box...

This shows 18s fitted to a bus...and a 993 3.6 turbo engine, 6-speed box...bit of a pattern developing here :blink: ...
 

kvinyl

Club Member
Club Member
February 20, 2007
4,708
9
Galway
Do you still ave the highlines?
Yes, i can weld:rasta:

Ill try anything once:evil:

Still have them...loads of interest but no takers just yet...would love to see them on a split:evil:...or anything for that matter actually...

I'll PM on a price...
 

Coxy

Eircooled Club Member
Club Member
April 20, 2007
14,525
2,367
Limerick
www.beetle.ie
Dear Santa,

Since you ruined christmas for me years ago by not bringing me a Raleigh Chopper, can you please get it right this time and bring me a set of Highlines :D

Cathal

P.S. I've been a very good boy this year!


P6171344.jpg


P1080847.jpg