Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

For Sale - 1977 1.6L Standard Beetle

Coxy

Eircooled Club Member
Club Member
April 20, 2007
14,526
2,367
Limerick
www.beetle.ie
30082008258.jpg

30082008259.jpg

30082008260.jpg

30082008262.jpg

30082008266.jpg

30082008268.jpg
 

drifterex

Club Member
Club Member
September 18, 2008
608
179
Waterford, Éire
Thanks for the pics coxy.

Still available (see post in other thread in the Lounge).

There's a rear view pic near the end of this thread - pic Coxy took a few weeks back. The dent to the rear apron occurred when the car slipped on the car transporter from Cork to Galway about two months ago.

I can take a few more pics tomorrow when it's daylight.

Cheers Padraig.What sort or condition are the heater channels and floor pans in? I know it needs a bit of attention on a 1/4 panel and under the seat, and a lick o paint, just wanna get a rough idea of what i'll need to do.
And is there any possibility you'd sell the porsche cups?

I gotta go to the bank and ask nicely in the morning :)

Mark.
 
Last edited:

kvinyl

Club Member
Club Member
February 20, 2007
4,708
9
Galway
Thanks for the pics coxy.



Cheers Padraig.What sort or condition are the heater channels and floor pans in? I know it needs a bit of attention on a 1/4 panel and under the seat, and a lick o paint, just wanna get a rough idea of what i'll need to do.
And is there any possibility you'd sell the porsche cups?

I gotta go to the bank and ask nicely in the morning :)

Mark.

Cheers for the pics Coxy, yours are more up to date than mine are...


Mark - truth be told, the heater channels will need to be replaced at some stage. IIRC, the drivers side one is a bit crusty in places and the passenger side one has surely gotten moisture into it from the dodgy 1/4 panel. Structurally, the car is sound but if you were giving it a lick of paint it'd be wise to get the channels done also.

The floorpan has a hole above the battery under the rear seat and the metal ahead of the pedal cluster has gotten thin also.

I'll take a good number of photos when I get home this evening - I'll take the carpets up and get a couple of shots of the floorpan too.

Yes, I'd sell the Cups. Had actually cleared out the garage over the weekend and taken a load of photos of wheels and things that I need to get rid of so the timing fits...
 

drifterex

Club Member
Club Member
September 18, 2008
608
179
Waterford, Éire
Cheers for the pics Coxy, yours are more up to date than mine are...


Mark - truth be told, the heater channels will need to be replaced at some stage. IIRC, the drivers side one is a bit crusty in places and the passenger side one has surely gotten moisture into it from the dodgy 1/4 panel. Structurally, the car is sound but if you were giving it a lick of paint it'd be wise to get the channels done also.

The floorpan has a hole above the battery under the rear seat and the metal ahead of the pedal cluster has gotten thin also.

I'll take a good number of photos when I get home this evening - I'll take the carpets up and get a couple of shots of the floorpan too.

Yes, I'd sell the Cups. Had actually cleared out the garage over the weekend and taken a load of photos of wheels and things that I need to get rid of so the timing fits...

Sweet. The bank came good :) how much for the car with the wheels, and how far could you transport it?

Mark