Doors and windows

[riggsi]

Yeah sorry that composite door might fit with a bit of trimming depending on the depth of your revels,what type of door is in their now?how old is the house?

 

[Mikey]

Yeah sorry that composite door might fit with a bit of trimming depending on the depth of your revels,what type of door is in their now?how old is the house?

The house is Mid'60's. Theirs currently a red(garnet due to the sun) on it, don't think the folks are fuzzy about colours.
Its a wooden door with three panes of glass in it. Should I email you a pic of the door? cheers

 

[riggsi]

If you could get me a picture of the existing door in place i would have a better idea of wheather or not it will fit,Its about 30mm wider than it should be for the measurements you have given but they can be trimmed down,I wit get you some pics tomorrow.

 

[riggsi]

My email is riggsinotch@gmail.com

 

[Mikey]

If you could get me a picture of the existing door in place i would have a better idea of wheather or not it will fit,Its about 30mm wider than it should be for the measurements you have given but they can be trimmed down,I wit get you some pics tomorrow.

Grand, could I get your email address for the picture. Could you PM me a price?

 

[Rocky]

... we were Marvin dealers ...

Broke glass in one of our Marvin windows with stone from the lawn mower, is replacement glass normally fitted from the inside?, where is the best place to get replacements?

 

[riggsi]

Doooh,are they sash or casement?

 

[kongomush]

Re: Doors and windows

I'm reinstating this window to a single unit. Ideally it would he a sash to match the house (and planning permission) but I would fit anything really.

Current measurements are 1250w x 1250h but could go smaller all round by 100mm.

If you have anything close to that let me know. Cheers

 

[Rocky]

Doooh,are they sash or casement?

Sliding sash

 

[riggsi]

Sliding sash

The sashes are built around the doubleglazed unit so you will have to go back to Marvin and have one flown in from the States.If you take the sash out you will find a sticker on the side with all the part numbers you need.

 

[riggsi]

I'm reinstating this window to a single unit. Ideally it would he a sash to match the house (and planning permission) but I would fit anything really.

Current measurements are 1250w x 1250h but could go smaller all round by 100mm.

If you have anything close to that let me know. Cheers

I should have a white sash around that size will have a look later.

 

[riggsi]

@ Kongomush

I have a white PVC sash 900x1200 will have to go to the warehouse to see if i have anything bigger.

 

[kongomush]

Re: Doors and windows

@ Kongomush

I have a white PVC sash 900x1200 will have to go to the warehouse to see if i have anything bigger.

Is that 900 high? I'm in a position to bring up the sill and can come down from the top too. What would you be looking for price wise?

 

[Rocky]

The sashes are built around the doubleglazed unit so you will have to go back to Marvin and have one flown in from the States.If you take the sash out you will find a sticker on the side with all the part numbers you need.

:wallbash: ...... sounds expensive!

I removed those stickers when painting the windows, although i think that window isn't painted yet (7 yrs later), i'll check tonight, Thanks!

 

[riggsi]

width first so 900 wide,I am selling the sash at 160
or I have this aluclad french casement for the same price,its 1220x1200

 

[riggsi]

1

 

[Mikey]

Sent a picture to your email address.

 

[riggsi]

heres the door i am looking for 200 its just a bit dusty but never been fitted

 

[riggsi]

I have these 2 €60 for the pair

 

[Mikey]

Thats OVC isn't it, better talk to the folks. Might have to paint it, how much to fit it? or do you just want to sell the door on its own. Cheers