Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

1302 - having a clear out

diarmuidmcd

Club Member
Club Member
October 22, 2008
607
4
Louth
Clearing out some old 1302 parts. There’s two new steering dampers, a new UJ for the steering, a kmph speedo, a decent and complete 34PICT, new speedo cable and a complete engine seal kit (German I think) with decent flywheel oil seal.

Make me an offer…

Collection only..

Diarmuid
 

Attachments

  • IMG_9745.jpeg
    IMG_9745.jpeg
    169.7 KB · Views: 113
Last edited:

diarmuidmcd

Club Member
Club Member
October 22, 2008
607
4
Louth
There’s a little bit of damage around the bottom of the bezel. It did work when it went into the box 10 yrs ago, but I have no way of verifying
 

jim6238

Club Member
Club Member
October 15, 2022
44
27
Thanks for the picture, where are you based, and what money have you in mind thanks
 

diarmuidmcd

Club Member
Club Member
October 22, 2008
607
4
Louth
It cost me 50 euro 15 years ago and has been sitting in that box for the last 10. Make me an offer. I’m based in Louth but work at the airport.
 

diarmuidmcd

Club Member
Club Member
October 22, 2008
607
4
Louth
Things that are also in the mystery box are:
Complete 34PICT need ultrasound cleaning but was OK - €30
New 1302 universal joint for steering - €30
2x new steering dampers 1302 - €20 ea
New Bosch FI filter for 412LE - €5
New Speedo cable 1302. - €5
Complete engine seal kit plus red flywheel oil seal - €15
Mexi 009 - works as well as they ever did… €15

There’s a grab bag of new brake springs shoes and other misc bits I’d take 125 for the lot including the speedo or 100 without the speedo ( if someone other than Jim wanted the crate)
 

jim6238

Club Member
Club Member
October 15, 2022
44
27
Yeah ill take the speed Diarmuid just have to sort out how to get it
 

diarmuidmcd

Club Member
Club Member
October 22, 2008
607
4
Louth
Diarmuid.

Interested in carb. what brand is it?

... maybe engine seal kit..

Cheers
Deckie
Well Deckie,

Orig German Solex. Will take a few detail pics later on and post tomorrow. As far as I remember, it was ok but would benefit from an ultrasonic clean
 

diarmuidmcd

Club Member
Club Member
October 22, 2008
607
4
Louth
Deckie,

Pictures as requested
 

Attachments

  • IMG_9787.jpeg
    IMG_9787.jpeg
    114.6 KB · Views: 92
  • IMG_9786.jpeg
    IMG_9786.jpeg
    110.6 KB · Views: 101
  • IMG_9785.jpeg
    IMG_9785.jpeg
    113.4 KB · Views: 94
  • IMG_9784.jpeg
    IMG_9784.jpeg
    85 KB · Views: 98
  • IMG_9783.jpeg
    IMG_9783.jpeg
    96.8 KB · Views: 93
  • IMG_9781.jpeg
    IMG_9781.jpeg
    103.7 KB · Views: 99
  • IMG_9780.jpeg
    IMG_9780.jpeg
    112.3 KB · Views: 95

brianm

Club Member
Club Member
October 25, 2010
641
21
Tipp
Is the steering uj the same as one for a 1303 ?...I assume so. If so can you post.and in the box are they adjustable pushrods if so for what engine