044 Magnum+ heads machined for 94mm (42x37 valves, Dual Springs)
Brand new in Box.
http://www.vwheritage.com/vw.cfm?act=shop....&country=GB
"044's are fitted with SUPERGRIP S/S Single Groove Valves!. Stronger by design with big flowing ports. Hi-Rev springs chromoly retainers bronze silicon racing valve guides 3/4" long reach spark plug bosses double thick combustion chamber walls tapered cooling fins and factory produced by an O.E.M supplier to Volkswagen. Chamber Volume; Approximately 55 cc's "
cost 700+ euro + shipping from VW Heritige
Looking for 600 ONO
Phone 087 6876537 or PM me
updated 26,jan2011
I dug out a few more things to move on if anyone is interested,
'65 on pop outs with latches and used pinch welts - need new rubber and hinge plate/cover(WCM do them)
I need 100 euro for these:
also have a set of DanGurney Ind. wheels -a few scrapes etc(30+ years old) but no bad kerbing etc
Need 400 euro for these:
Both are available from Meath or North Dublin area.
Cheers,
Jason.
Brand new in Box.
http://www.vwheritage.com/vw.cfm?act=shop....&country=GB
"044's are fitted with SUPERGRIP S/S Single Groove Valves!. Stronger by design with big flowing ports. Hi-Rev springs chromoly retainers bronze silicon racing valve guides 3/4" long reach spark plug bosses double thick combustion chamber walls tapered cooling fins and factory produced by an O.E.M supplier to Volkswagen. Chamber Volume; Approximately 55 cc's "
cost 700+ euro + shipping from VW Heritige
Looking for 600 ONO
Phone 087 6876537 or PM me
updated 26,jan2011
I dug out a few more things to move on if anyone is interested,
'65 on pop outs with latches and used pinch welts - need new rubber and hinge plate/cover(WCM do them)
I need 100 euro for these:
also have a set of DanGurney Ind. wheels -a few scrapes etc(30+ years old) but no bad kerbing etc
Need 400 euro for these:
Both are available from Meath or North Dublin area.
Cheers,
Jason.
Last edited:
