Welcome to Eircooled
Our Ethos is simple; We promote, maintain, and encourage the use of classic aircooled vehicles. We run the club in an open, inclusive, and democratic environment. We encourage all members to have an equal say and part to play in the club.
Register

Doors and windows

Yeah sorry that composite door might fit with a bit of trimming depending on the depth of your revels,what type of door is in their now?how old is the house?
 
riggsi said:
Yeah sorry that composite door might fit with a bit of trimming depending on the depth of your revels,what type of door is in their now?how old is the house?
Click to expand...

The house is Mid'60's. Theirs currently a red(garnet due to the sun) on it, don't think the folks are fuzzy about colours.
Its a wooden door with three panes of glass in it. Should I email you a pic of the door? cheers
 
If you could get me a picture of the existing door in place i would have a better idea of wheather or not it will fit,Its about 30mm wider than it should be for the measurements you have given but they can be trimmed down,I wit get you some pics tomorrow.
 
riggsi said:
If you could get me a picture of the existing door in place i would have a better idea of wheather or not it will fit,Its about 30mm wider than it should be for the measurements you have given but they can be trimmed down,I wit get you some pics tomorrow.
Click to expand...

Grand, could I get your email address for the picture. Could you PM me a price?
 
Re: Doors and windows

I'm reinstating this window to a single unit. Ideally it would he a sash to match the house (and planning permission) but I would fit anything really.

Current measurements are 1250w x 1250h but could go smaller all round by 100mm.

If you have anything close to that let me know. Cheers
 

Attachments

  • ImageUploadedByTapatalk.jpg
    ImageUploadedByTapatalk.jpg
    21.6 KB · Views: 294
Rocky said:
Sliding sash
Click to expand...


The sashes are built around the doubleglazed unit so you will have to go back to Marvin and have one flown in from the States.If you take the sash out you will find a sticker on the side with all the part numbers you need.
 
kongomush said:
I'm reinstating this window to a single unit. Ideally it would he a sash to match the house (and planning permission) but I would fit anything really.

Current measurements are 1250w x 1250h but could go smaller all round by 100mm.

If you have anything close to that let me know. Cheers
Click to expand...

I should have a white sash around that size will have a look later.
 
@ Kongomush

I have a white PVC sash 900x1200 will have to go to the warehouse to see if i have anything bigger.
 
Re: Doors and windows

riggsi said:
@ Kongomush

I have a white PVC sash 900x1200 will have to go to the warehouse to see if i have anything bigger.
Click to expand...

Is that 900 high? I'm in a position to bring up the sill and can come down from the top too. What would you be looking for price wise?
 
riggsi said:
The sashes are built around the doubleglazed unit so you will have to go back to Marvin and have one flown in from the States.If you take the sash out you will find a sticker on the side with all the part numbers you need.
Click to expand...

:wallbash: ...... sounds expensive!

I removed those stickers when painting the windows, although i think that window isn't painted yet (7 yrs later), i'll check tonight, Thanks!
 
width first so 900 wide,I am selling the sash at 160
or I have this aluclad french casement for the same price,its 1220x1200
 
Last edited:
Thats OVC isn't it, better talk to the folks. Might have to paint it, how much to fit it? or do you just want to sell the door on its own. Cheers
 
You must log in or register to reply here.
Top Bottom
Back