[For Sale: Parts] t3 bus body cuts

[kombi.noise]

am scrapping 2 in next few weeks
if anyone needs some now is the time...
good front doors available too

 

[trev]

Pete, can you cut out the top engine access hatch and a few inches of the floor around it? So I can weld it into another vehicle?

 

[coley]

hi pete, looking for the following if you have them in decent shape:

-front drivers RHS arch + step
-RHS B-pillar skin bottom 3 foot (to swage mid-way up the van) including about 4 inches into the panel to the left of it
-about 2 foot length of the front upper windscreen frame (a few inches back)
-about 1 foot of the bottom rear left clip/corner

thanks
john

 

[kombi.noise]

should be able to sort these out trev and john

 

[podsyb]

i'm looking for similar to what Trev is after, engine hatch area, as wide as possible and around 3 inches of the sloped part running down to the floor , thanks

 

[kombi.noise]

ok podsy there are 2 there

 

[podsyb]

good stuff , thanks Pete, ill take a spin up that way some day