[For Sale: Parts] Audi A8 - 17" Alloy Wheels and Tyres

[knk]

5 x Genuine Audi A8 Alloy wheels in excellent condition.

Wheels are 17" x 8", PCD 5x112, offset 35..40, bore 57.0

Tyres: Goodyear Eagle Touring NCT3, 225/55/17 with 80% thread left on 4 of them, the 5th has wear to the outside edge. (Goodyear Tyres now sold and replaced with Michelin & Federal, very good tyres)



Possible Vehicles to fit include:

• Audi A4, A6, A8, V8, S2, S4,S6
• Most Mercedes
• Volkswagen Transporter T25, T4 - although you may need to bore out the centres slightly to get them over the front hub nut on the T25. The back squeeze on without altering.
• New Golf MK5
• Skoda Superb '02>
• Passat's - 5 stud version from '97 to '00, All other versions from '00>
• Vw Touran '03>
• Vw Phaeton 02>

Looking for €425 ono.

NEW PRICE OF €300 ono

Pics to follow tomorrow but they are similar to these.

 

[knk]

Here's proof that they fit the T25....

Trial fit on my bus.

My plan was to paint them black with some red bands similar to these ones. I think they look well mean in black!

 

[Roadcow]

Sweet set of wheels and tires. Good luck with the sale.

 

[Turlough]

Wont fit T5 as you have listed , T5 is 5 x 120 PCD not 5 x 112

Nice wheels good luck with sale

 

[knk]

Cheers, wasn't 100% sure on the T5 PCD, thought it was the same as the T4!

Fitment list adjusted!

 

[knk]

Ok, Goodyear Eagle tyres have been sold separately and no longer available!

I will be replacing them with some almost new tyres I have here, same size's 225/55/17. Mixture of Michelin & Federal!

Pics to come this evening once the new tyres are fitted.

Now Looking for €300 ono

 

[knk]

And finally the pics with the Michelin & Federal Tyres mounted. One of the wheels still has a Goodyear Eagle but this is the one that is worn. The four I replaced today all have minimum of 6mm thread left.

OPEN TO OFFERS...sensible ones please!

 

[podsyb]

Hmmm , would these help the gear ratios on my T25 1.9td

 

[knk]

Hmmm , would these help the gear ratios on my T25 1.9td

...are you running with standard T25 steels?

 

[trev]

they'd give you about 4% better top end based on the calculations here:

http://www.miata.net/garage/tirecalc.html

it all helps!

 

[podsyb]

Standard steelies 6 rib 5 speed box , am I mad ?, sorry for the thread hijack

 

[knk]

I just measured a wheel compared to a stock T25 wheel and it is approximately 38mm bigger in diameter which would equate to a 4% increase as pointed out by Trev. Nice handy site too Trev!

 

[george]

john,

i noticed on VAG that you could consider a swap for 4x100 alloys.

i have these, 17" 4x100, et38. No tyres. any interest and we could discuss the balance due to you.

 

[knk]

Hi George, thanks for the offer but not really my kind of alloys. Was looking for something a bit retro or just a little different from the norm, even some banded steels in 4x100.

 

[Roadcow]

And finally the pics with the Michelin & Federal Tyres mounted. One of the wheels still has a Goodyear Eagle but this is the one that is worn. The four I replaced today all have minimum of 6mm thread left.

OPEN TO OFFERS...sensible ones please!

Jees !!!! You are gonna scratch that custom paint on the 62!!!!!!!!! Good luck with the sale Boss

 

[knk]

Jees !!!! You are gonna scratch that custom paint on the 62!!!!!!!!! Good luck with the sale Boss

What do you mean...the wheels are holding up the complete side of the van so it doesn't fall off! :razz: